Building owners and property managers
You have doors to control, cameras to add, or a system someone left unfinished. Mark walks the site before we quote, so the price comes from someone who has seen the building, and one crew does the work.
Commercial security systems, built from the conduit up.
Access control, cameras, alarms, intercoms and gates, and the conduit, cable and fibre they run on. One crew installs all of it, from the site walk to the handover.
Contractor or integrator with a security scope? Work with us as your subcontractor
One crew for the whole run.
The security part of a job is usually split between an electrician, a cabling contractor and a security integrator. We do all three parts, so one crew answers for it from the first conduit to the last label.
Usually
- ElectricianStage 1
- Cabling contractorStage 2
- Security integratorStages 3 to 6
With us
MNB SecurityStages 1 to 6
Pathway and conduit
EMT, rigid and threaded conduit, bent and threaded on site, indoors and out. That includes large trunk runs, which most low-voltage shops leave to another trade.
Conduit bank with matched offsets, down to the enclosures. Cable and fibre
Cat6 and Cat6A pulled, terminated and tested on a certifier. Fibre is fusion spliced and OTDR tested where a run is too long for copper.
Encoders and fibre patch cords in the rack. Devices and door hardware
Readers, cameras, detectors and intercom stations mounted and aimed. Electric strikes, maglocks and exit devices fitted to the door as it was built.
Vestibule intercom, reader and accessible push buttons. Panels and head-end
Controllers, power supplies and batteries mounted in the enclosure, wired by function and labelled, so the next technician can read the panel.
Two controllers in wire duct, every door's wiring labelled. Programming and testing
Credentials, schedules, camera views and alarm zones set up with you. Every device is tested before we call the job finished.
- Readers, locks and door contacts, door by door
- Cameras aimed and focused to the coverage plan, each on a fixed address
- Alarm zones, users and arming schedules
- Every permanent cable link, on a calibrated certifier
Labels, as-builts and handover
You get the labels, the drawings, the cable test files and the port records, and the people who will use the system are shown how.
What you get at handover
What we install.
Seven systems, installed and serviced on commercial, industrial, institutional and multi-residential buildings.
- Access ControlCard, fob, mobile, keypad and biometric access for doors, gates, elevators and equipment.
- Video SurveillanceIP camera systems with on-site, edge or cloud recording, aimed to your coverage plan.
- Intrusion AlarmsBurglar alarms with door, overhead-door and motion detection, panic buttons and perimeter protection.
- Intercom & EntryIP video intercoms and telephone entry for lobbies, doors and gates, with remote door release.
- Gates & Vehicle AccessTruck-yard, employee-lot and pedestrian gate access with long-range readers, intercoms and gate operators.
- Structured CablingCopper cabling, conduit, networking, wireless and in-building cell signal, tested and documented.
- Fibre OpticsSingle- and multimode fibre: splicing, termination, loss and OTDR testing, and fibre to pole cameras.
- Service and takeoversRepairs, added doors and cameras, and takeovers of systems someone else installed.
Photos from our own jobs.
Nothing here is stock. These are panels, conduit, cameras, readers and gates as we left them.
Who we work for.
Contractors and integrators
You have a security scope you can’t self-perform. We build it to your drawings, labour-only or with materials, and close it out with labels, as-builts and certified cable tests.
What you get when we leave.
Every job ends with the records a property team needs to run the system and have it serviced.
Labels
Every device, cable and port is labelled, so the next technician can find it.
Cable test files
Every permanent link is tested on a calibrated certifier, and the report files are yours.
As-built drawings
Drawings marked up with where each device and pathway actually went.
Switch and port records
Which device is on which port, for whoever looks after the network.
Owner-operated since 2020.
Mark, the owner, walks each site, manages the job and does the field work, with technicians and labourers brought in as each job needs.
We work in the GTA, and southern Ontario when the job warrants it.
About MNB SecurityHave a building that needs work?
Tell us where it is and what you need. A few lines is enough; drawings can follow by email.